Generally speaking, there are three methods for effective management of hazardous waste. 1. Try to reduce the generation of hazardous waste in the source of hazardous waste. 2. Reform processes and technologies during the production process, recycling and comprehensive use of harmful waste. 3. Scientific and harmless treatment in subsequent treatment is generally incinerated. This article simply introduces three common method of turning kiln treatment technology, and introduces the relevant matters that should be paid attention to in the use of fan.

The air -changing fan is once again a common machine in people in daily life. If you can see its existence, shopping malls, toilets, kitchens, etc. in a relatively closed space, what is the role of the air fan? ventilation. It is to ensure air circulation. Modern ventilations are widely used in factories, mines, tunnels, cooling towers, vehicles, ships, buildings, ventilation, dust discharge, cooling, boiler, ventilation and air, air adjustment equipment and home appliances of the industrial furnace Dry and choice, wind tunnel. The working principle of a ventilator: The ventilator relies on the mechanical energy of the input, and the exhaust pressure is less than 1.5 10 4 waves. The air -changing fan is a product type of fans, but people usually call the air -changing fan tube as a fan, and the air -changing fan is another name for the fans. Its main role is to accelerate the liquidity of gas. The air -changing fan is different from the size, power, and working methods. There are many classifications, and the effects are the same. The air -changing fan has a long history. In addition, the structure page of the ventilation of the ventilation in the development of thousands of years has become simpler and simpler, and the productivity has been greatly improved. During the reuse of the air -changing fan, it is also necessary to maintain regular maintenance. The loss of the air -changing fan of the environment is also different. Common problems with ventilators are the wear of fan and wind leaves.

In order to deal with the basic process of hazardous waste and solid waste, the rotary kiln is mainly used to handle medical waste, chemical waste, building waste, sludge, sludge, sludge and other large water and low heat. , A burning effect. When starting, the switching kiln needs to use a combustion fan. At the work, a fan needs to be used to supplement oxygen. The air intake point of a fan is generally a gas pit gas. The wind speed needs to be adjusted along the amount of combustion, and a fan needs to use a high -frequency motor. After the switching kiln was burned, the flue gas was fully burned again in the second combustion room. The second combustion room has a second -level fan and a second -level fan. The fan can get the air by collecting the garbage pit. The burning flue gas enters the flue gas purification ring , By quenching-dust removal-induction, wet washing device-preheating-a chimney empty. The entire process route uses multiple centrifugal fans. Pay attention to the location of the inferior fan. In this industry, due to the characteristics and process characteristics of the smoke of the drum machine, the fan will be designed and handled. This is a special centrifugal ventilator for incineration. If you need to know more, please contact us at any time!