The use of the SDS tunnel fan is very common, but it may be misunderstood during use, so please fully understand these problems and try to use it. analyze

One of the issues that need to be noted is that when reinstalling the blocking cover for centrifugal transportation during the repair process, avoid the errors during the installation and release of the outer cover, and avoid the effect of high temperature. During the production process of the factory, a fixed warehouse at the end of the factory was designed. Therefore, errors may occur during installation. requires attention.

The second common error is that for the SDS tunnel fan, accuracy requirements are usually achieved by fixing or loosening ground bolts. The adjustment pad is configured between the motor or liquid coupling and the substrate. This is incorrect. It is easy to cause problems and will be used later.